BUCHI Melting Point M-560 - Manual (Page 31)

6 Operation
31 Melting Point M-560 Operation Manual, Version D
When a measurement is completed, the last method parameters are always retained in the instrument.
To start the same method, just press
START.
NOTE
Results are stored in memory until a new measurement is started or the instrument is switched off.
6.3.5 Printout
a
b
c
d
e
Printout
a Instrument type
b Determination parameters
c Manual pressed results
d General information
e Signature of person making the de-
termination
Boiling temp. = Temperature sample boiled.
Boiling point = Boiling temp. corrected according entered
barometric pressure.
If a barometric pressure of 1013 mbar is entered
boiling temperature and boiling point results are
equal.