Checkline DFX-7 User Manual
Page 120
Dakota Ultrasonics
116
10) Press the UP or DOWN arrow key to highlight SAVE CHANGES, and the
OK key to activate the confirmation screen.
11) Press the OK key to save the changes or the ESC key to cancel editing the
file parameters.
12) Press the MEAS key to return to the measurement screen.
11.7 Changing the active File - Open
The user may have transferred grid/seq templates from a PC to the DFX-7, or setup
grids/seq using the DFX-7 at an earlier time. The name of the currently active file is
always displayed at the top of the Grid/Seq Box in measurement mode (refer to
photo below). It’s not only important to recognize what file is currently active, but also
be able to change the active file at any time. The following procedures outline this
process:
Changing the Active File