Checkline DFX-7 - Manual (Page 79)

DFX-7 Ultrasonic Flaw Detector
75
6) Finally, press the MEAS key to return to the measurement screen and begin
taking readings.
10.4 Auto Find
The DFX-7 is equipped with a very handy feature for locating the detection point of a
return echo that is not currently in the viewable region of the display. The AUTO
FIND feature is a convenient way to automatically bring the detected echo into view
on the display. Once the echo is in the viewable area, the user can then make small
adjustments to the delay and range accordingly. The procedure to use the AUTO
FIND feature is outlined below:
Using Auto Find
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right, and the ESC key multiple times to tab left,
until the UTIL menu is highlighted and displaying the submenu items.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until AUTO FIND is highlighted.
3) Place the transducer on the test material and obtain a reading.