Eowave eobody 2 HF v1.2 - Manual (Page 10)

Receiver powering
USB enables self powering. Just plug the usb from Eobody2HF receiver to your computer usb in. The receiver LED will
turn green and off when the unit is well connected.
Transmitter powering
One of wireless systems biggest issue is the question of the transmitter autonomy vs battery weight.
The transmitter is delivrered with a rechargeable lithium battery. The battery autonomy depends on the number of sensors
used and on the type of sensors used.
To recharge the battery, plug the transmitter via USB to the USB I/O of your computer. At the first use, we recommend
that you charge the battery for 1 night.
Eobody2HF / Power
V. Questions of power...
VI. Understanding the Receiver LED language
The receiver LED is a tri-color LED. Here is the color code:
1 It’s green!
When connected to the USB in of your computer, the receiver LED will turn green. This means that it’s well
connected and active.
2. It’s green/orange!
When the receiver LED blinks green/orange, it means that the transmitter communicates with the receiver and
sends datae, and/or vice versa.
3 It’s red!
A red LED means that the receiver is in programmation mode.
4 It’s red/green
Check channel
10