Eowave eobody 2 HF v1.2 - Manual (Page 16)

Eobody2HF / Parameters
gate
noise gate:8 values [0-7]
filter
0-64
32 bits low-pass filter that smoothes the signal - for unstable sensors.
message Channel: [1-16]
This field enables the user to select a MIDI channel to which the MIDI message will apply (1 to 16).
Sensor
Noise band
Sensor signal
Sampled value
Sampled value
+MIDI message
2* (noise)
0
t
A noise gate threshold reduces
the bit depht of the signal. If the
analogue signal moves inside the
range of the noise gate, no mes-
sage will be sent. This field enables
the user to set the width of the
range. A large range will be very ef-
fective against strong noise but will
make the values less sensitive to
a relevant change of the analogue
signal. A threshold of 5 corresponds
to 127 different possible values (ie:
the analogue has to change at least
of 32 (from 4095 above or under its
current position to be detected as
changing). A threshold of 7 corresponds to 5 bits, usefull for switches or all on/off sensors.
16