Eowave eobody 2 HF v1.2 - Manual (Page 14)

The parameters window enables to adjust internal processing parameters for each input (1 to 16).
Refer to the description of each parameter for use. To increase or decrease parameter values, click on the case you want
to edit and slightly move up or down your mouse.
To save a configuration, click on «savemem».
What are these internal processing parameters?
Eobody2HF is not just an analogue-to-digital wireless converter, it has a unique internal processing especially designed to
analyse, process and configure the signal before it is sent to the host. This internal processing offers several advantages.
> Pre-configured parameters processings have been designed considering most common sensor use and are perfectly
adapted to sensor use for musical or video applications.
> You can use Eobody2HF directly with your software sequencer without programming needs.
> Internal processing does not use your computer cpu, so you can keep more cpu resources for your apps.
> Internal configuration can be saved inside Eobody2HF internal memory for future use.
> Parameters filter the signal to optimize data to be sent to the computer and get a better response from sensors. With
these, you will be able to choose parts of the signal to be processed, define the signal resolution, add a noise gate, a lag
low-pass filter, inverse the signal, choose the type of message to be sent...
Eobody2HF / Parameters window
Analogue input parameters window
14