Figure 2-12: fastening the drives to your system, Switch on your system – CREATIVE 4X CD-ROM Drives GCD-R542B User Manual
Page 24
Advertising
Setting Up Your CD-ROM Drive 2-9
3. Slide the drives back into place and fasten them to your system
as shown in Figure 2-12.
4. Switch on your system.
5. Proceed to the section “Installing the Software” in this chapter.
Connecting Cables to Your IDE CD-ROM Interface Card
If your drive comes with an IDE CD-ROM interface card, you need to
install the interface card and connect it to your drive.
Figure 2-12: Fastening the drives to your system.
Advertising