Hangar 9 Alpha 40 ARF Trainer - Manual (Page 16)

16 Hangar 9 Alpha 40 ARF Assembly Manual
 Step 12
Use a hobby knife to remove the covering from the opening
in the side of the fuselage for the speed control switch. Use
the hardware provided with the speed control to mount the
switch in the side of the fuselage.
 Step 13
Position the speed control in the fuselage as shown. It will
be secured once the battery trays have been installed.
 Step 14
Pass a hook and loop strap (not included) through the slots
in the two battery trays as shown.
 Step 15
Insert the first battery tray by angling it in the fuselage as
shown. The tray will then fit into the fuselage where it can be
slid toward the rear of the fuselage.