Programming c404 slave receivers – Inovonics FA104 User Manual
Page 14
© 1994 INOVONICS Corporation
10
LIT-FA104-USER 14-Nov-95
Programming C404 Slave Receivers
Press
ENTER to program a point or to modify settings.
Press
!
!
!
!
to go to POINT STATUS menu option or
"
to go to PROGRAM POINT.
Enter point number from keypad. Press ENTER.
At this point the programmer requests confirmation:
Arrow keys toggle between YES and NO.
Indicates successful point deletion. (Display remains for about 3 seconds, then
returns to the point number selection screen.)
Note: Programming parameters are not erased from receiver memory.
Transmitters may be re-programmed to the deleted point number.
POINT NUMBER:
ENTER # (1 to 4)
ARE YOU SURE?
!###
YES
"
Delete
Points
Press ENTER to
!#
DELETE POINT
"
POINT NUMBER: nn
DELETED