Inovonics FA104 - Manual (Page 16)

© 1994 INOVONICS Corporation
12
LIT-FA104-USER 14-Nov-95
Appendix B
FA464 Receiver Parameters
Default
Active on
Output Condition Programmable Options
1 Alarm ALARM / ALARM+TAMPER / TAMPER /
2 Alarm LO BATT / INACTIVE / TAMP+LO BATT /
3 Alarm TAMP+INACTIVE / LO BATT+INACTIVE /
4 Alarm ANY TX FAULT / DISABLED
...
...
16 Alarm
Transmitter Default
Condition Mode
Alarm Follower FOLLOWER / MOMENTARY / LATCHING
Inactive Follower
Tamper Latching
Low Batt Latching
Default Momentary Output time: 4 seconds 1 - 16 seconds
Default Receiver Parameters:
System ID: (randomly assigned at factory) 0 - 255
Point supervision: Yes Yes / No
Supervision window: 4 hours 1 - 99 minutes, 1 - 99 hours
Access code: 3446 0000 - 9999
Vision Plus compatible: No Yes / No
To reset the FA464 to default parameters refer to page 5 or see the receiver user manual.