KEYENCE DL-EP1 - Manual (Page 64)

- EtherNet/IP Compatible Network Unit DL-EP1 User’s Manual (IL) -
3-4 Message Communication
3-34
3
Communi
cat
in
g wit
h the
IL Seri
es
Attributes
Instance
ID
Attribute
ID
Name Description Attribute
Data
Type
00H
64H
(100)
Status
Indicates the status of this unit and connected
sensor amplifier.
bit0: DL-EP1 Error Status
Bit 1 to bit 13: Reserved for system
bit14: Warning Status
bit15: Error Status
R WORD
65H
(101)
Sensor Error
Status
Indicates the error status of the connected
sensor amplifiers. If an error occurs, the bit of
the corresponding ID number of amplifier is
turned to ON.
Bit 0 to bit 7: ID number 1 to ID number 8
Bit 8 to bit 15: Reserved for system
R WORD
66H
(102)
Warning Status (Unassigned) R WORD
67H
(103)
Reserved for system
68H
(104)
Current Value 0
Property
Indicates the status of current value 0 of each
amplifier. If the current value 0 is “Over
Range", “Under Range", or "Invalid", the bit
corresponding to the ID number is turned ON.
Bit 0 to bit 7: ID number 1 to ID number 8
Bit 8 to bit 15: Reserved for system
R WORD
69H
(105) to
6BH
(107)
Reserved for system
6CH
(108)
Error ID
Number
Indicates the ID number of the unit having
error.
Parameter range: 0 to 8
R UINT
6DH
(109)
Error Code
Indicates the error code that is happening.
Parameter range: 0 to 65535
R UINT
6EH
(110)
Warning ID
Number
(Unassigned) R UINT
6FH
(111)
Warning Code (Unassigned) R UINT
70H
(112) to
73H
(115)
Reserved for system
74H
(116)
Output1
(HIGH)
Indicates the HIGH output (output 1) status of
each amplifier. When HIGH is output, the bit
corresponding to the ID number of the sensor
amplifier is turned ON.
Bit 0 to bit 7: ID number 1 to ID number 8
Bit 8 to bit 15: Reserved for system
R WORD
75H
(117)
Output2
(LOW)
Indicates the LOW output (output 2) status of
each amplifier. When LOW is output, the bit
corresponding to the ID number of the sensor
amplifier is turned ON.
Bit 0 to bit 7: ID number 1 to ID number 8
Bit 8 to bit 15: Reserved for system
R WORD
76H
(118)
Output3
(GO)
Indicates the GO output (output 3) status of
each amplifier. When GO is output, the bit
corresponding to the ID number of the sensor
amplifier is turned ON.
Bit 0 to bit 7: ID number 1 to ID number 8
Bit 8 to bit 15: Reserved for system
R WORD