Setup – ALTANA Temp-Gard 12p Manual User Manual
Page 17
Advertising
16
Setup
6. Setup
6.1 Measurement Parameters
You can set:
Number of Probes
Measurement time
Trigger
Measurement Interval
Unit
6.1.1 Number of Probes
Select the number of probes you are going to use.
Select the number with the cursor and press the
OK button.
6.1.2 Measurement Time
Select the total duration of the measurement.
Days
Hours
Minutes
Select the appropriate by clicking on it and set the
time according to your measurement necessities.
Advertising
This manual is related to the following products: