ALTANA Temp-Gard 12p Manual User Manual
Page 18
Advertising
17
Setup
6.1.3 Trigger
You can choose between temperature and time
trigger. That means that the measurement will start
after a preselected temerature or time is reached.
Click on the appropriate and choose the interval
with the cursor.
For a measurement without trigger choose
„Without Trigger“.
6.1.4 Measurement Interval
You can set the measurement interval in minutes,
seconds and 100 milliseconds.
Click on the appropriate to set the interval.
6.1.5 Unit
Select the unit:
Celsius
Fahrenheit
Advertising
This manual is related to the following products: