Avlink YX-1044 - Manual (Page 14)

14
7.0 Matrix Application Software
7.0.1 Software Introduction
The 《AV Matrix》 Matrix control software applies to different input/output matrixes.
7.0.2 Software Description
The《AV Matrix》matrix testing software is an application tool developed for matrix testing and
application. The software operation environment is as follows:
Window98/2000/7/NT/XP/Vista/ operatng systems
32M interal memory or above
10M hard disk space or above
CD-ROM
At least one serial communication port
7.0.3 Software Activation
First, you must power off both the YX matrix and the computer. Then, connect the matrix
RS-232 port to the PC RS-232 port with the bundled communication cable. (Refer to the
previous section “YX Matrix and Control Computer Connection”.
Power on the YX matrix and the computer:
Activate the AV Matrix.exe on the bundled CD-ROM in the control computer to enter the
software configuration screen.