Avlink YX-1044 - Manual (Page 21)

21
9.0 LAN Options
9.0.1 LAN Web Configuration
Open the Browser, keyin the default IP address: http://192.168.0.3 to login the AV MATRIX
Control configuration screen. Once the default IP address is be changed, please use the changed
IP to login.
The software controls signal connection between the corresponding input port and output port as
required. The LAN main configuration screen is as below:
Figure 7-8 LAN Web Configuration Screen
) YX is integrated Video/Audio switching equipment, please only keyin the Output Channel No.
into the Video field, the Audio field value will be a default depends on the Video value
automatically.
Scan: To search the host controlled by the LAN Web Configuration. When the Console List
content is empty, you can click the Scan to research and update the Console List.
Options: Allows you to configure the IP address.
Set: Click this button to set the connected combinations both output and input ports.
Refresh: To refresh the values of the configuration screen. Any changed settings directly on the
YX-1044 equipment will not respond to the AV Matrix operating interface, you have to click the
Refresh button to refresh the configuration screen so that showing the changed values.
OFF: Disable the entire output channels.
STO: The “Store Key” saves all current input/output corresponding relations.
RCL: The “Retriever Key” retrieves the saved input/output corresponding relations.
) For more relatived information, please refer to 5.0.1. Front Panel.
All Output: A Hot Key for you to set the same value to all output channel. Select the All
Output check box, then key in example “2” value in the channel 1 output. Click anywere on the