Avlink YX-1044 - Manual (Page 17)

17
the right (or you can press the Deselect all output key). This way, you have selected video
switching of input 01 to output 01 and 04
Step 3: Make sure you have selected “AUDIO” and not “Video”.
Step 4: Select output number key 04 to the right and input number key 02 to the bottom.
Afterwards, press again the previously-pressed output number key to the right（or you can
press the Deselect all output key）. This way, you have selected audio switching of input 02
and output 04.
Upon completion of the above 4 steps, you have completed the operation of switching video
channel 1 to output channels 1 and 3 while also switching audio channel 2 to output channel 4.
7.0.6 Disconnect Function Keys
Disable all the unused output ports.
A specific example of operation is described as below:
The present input and output relations are shown in Figure 7-2 below:
Figure 7-2
First you have to disable the output ports including port 03、02、and 01.
Step 1: First press down the output number keys 03, 02 and 01 to the right of the blue
configuration area.
Step 2: Press the “Disconnect” key.