Avlink YX-1044 - Manual (Page 6)

6
ƒ IR1: Infrared receiver.
ƒ All: This key allows you to set single input channel to all output channels.
- Press the “All” key.
- Select the one of the IN 1~4 keys.
- The selected IN x key will deliver the singal to all output channels.
- You can also press the “All” key and then the “OFF” key to disable all the displayed
switching settings.
ƒ OFF: Disable the entire output channels. Press the one of the OUT x keys that you want to
disable the output channel, then press the OFF key. You can also press the “All” button and
then the “OFF” button to disable all the displayed switching settings.
ƒ STO: The “Store Key” saves all current input/output corresponding relations.
- Press the “STO” key firstly. (Supports up to 4 sets of memories, you can select the
memory location through OUT1~OUT4).
- Arrang the Output and Input channel combinations (output channel key 1~4).
- The relation between the Output and Input settings will be saved in the memory
permanently.
ƒ RCL: The “Retriever Key” retrieves the saved input/output corresponding relations.
- Press the “RCL” key firstly.
- Then make a random to select one of output channel key 1~4.
- The system will retrieve the saved input/output status and implement current staus
switching.
ƒ AUDIO: The audio switching selection key switches to another output channel from the same
channel.
Example: Press the Audio key to open or close the Audio switching function. When the LED
indicator next to the Audio key lights shows switching function is open and when the light
goes off shows you have selected to close the audio switching function.
ƒ VIDEO: The video switching selection key switches to another output channel from the same
channel.
Example 1:Press the Video key to open or close the video switching function. When the LED
indicator next to the Video key shows video switching function is open and when the light
goes off shows the switching function is close.
ƒ LCD: LCD display shows current YPbPr matrix status and operation status.