Avlink YX-1044 - Manual (Page 22)

22
screen, the all channel output will become “2” value.
Figure 7-9
Port Key In: A Hot key that is for key in the Value1~4 quickly.
Reserve and AV Sync: Not be definited for this Model.
Previous and Next: Not be definited for this Model
9.0.2 LAN Main Operation Interface
Refer to the main configuration screen as above, for the basic operation is described as below:
Example: Now there is an YX-1044 matrix having all the input/output ports properly connected
to the equipment. If you want to set channel 1 input to channel 2, 3 and 4 output; channel 3
inputs to channel 1 output.
Figure 7-10
Step 1: For channel 2, 3, 4 Output, please keyin the value “1” in the Video fields.
Step 2: For channel 1 Output, please keyin the value “3” in the Video fields.
Step 3: Click “Set” button.
Upon completion of the above 3 steps, you have actually completed the switching operation of
having channel 1 input to channel 2, 3 and 4 ouput while at the same time successfully switched
from channel 3 input to channel 1 output.