AvMap EKPIV series - Manual (Page 68)

68
The Vertical mode is the default in order to use the unit with the attached leg mount.
The Horizontal mode can be used when the unit is placed on the panel or using one of the R-A-M
mounting options. While in the Moving Map Mode :
>’MENU’ 1 sec. + “SYSTEM SETUP” + ‘MENU’ + “GENERAL SETUP” + ‘ENTER’ +
“LAYOUT” + ‘ENTER’ + “VERTICAL” or “HORIZONTAL”
An information screen will appear to ensure the desire is to change and to notify that the unit will
restart. The Warning Page will show; hit ENTER to have the Moving Map appear. The unit will
restart in the new display mode selected.
14.1.9 data Window Color
This setting controls the background color of the data window display.
14.1.10 Menu Color
This setting controls the background color of menus display.
14.2 FIx Set-UP
The Fix Setup sub-menu contains options relating to GPS data input and display.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FIX SETUP” + ‘ENTER’
14.2.1 Fix Source
The EKP-IV uses positioning information provided by the internal GPS-receiver or by an external
NMEA 0183, external Air Data, or External RNAVdata string.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FIX SETUP” + ‘ENTER’ + “FIX
SOURCE” + ‘ENTER’
Use the cursor key to select and ‘ENTER’ to accept. When connecting the EKP-IV to an external
source, be sure the data output of the external device is set for the correct format (see Sec. .5).
The default setting is Internal GPS.
14.2.2 differential Correction Source
The EKP-IV can be connected to a DGPS Beacon Receiver that sends RTCM-104 data. To select the
Differential Correction source:
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FIX SETUP” + ‘ENTER’ +
“DIFFERENTIAL CORRECTION SOURCE” + ‘ENTER’
Options are: NONE, WAAS, RTCM 100, RTCM 400, RTCM 4800, RTCM 9600, RTCM 1900,
RTCM 38400. The default setting is NONE. WAAS corrections are handled by the internal GPS
receiver and do not require additional equipment.
14.2.3 Fix Symbol
A flashing icon on the Moving Map displays the GPS position fix.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FIX SETUP” + ‘ENTER’ + “FIX
SYMBOL” + ‘ENTER’
This setting allows you to select among a Plane or Standard (circle with an “X”) icon. The default
setting is Plane.