AvMap EKPIV series - Manual (Page 74)

74
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ + “FUEL”
+ ‘ENTER’
You may select Gallons (GAL), Liters (LIT), Kilograms (KG), Pounds (LB) or British Gallons (BGAL).
The default setting is Gallons.
14.5.7 vertical Speed
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ +
“VERTICAL SPEED” + ‘ENTER’
The Vertical Speed is used in the Vertical Navigation calculation. It can be displayed as Feet per
Minute (FT/MIN) or Meters per second (M/S) or Degrees (DEG). The default setting is Feet per
Minute.
14.5.8 temperature
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ +
“TEMPERATURE” + ‘ENTER’
The Temperature is used in the Wind Calculation. You may select Fahrenheit (F) or Celsius (C). The
default setting is Celsius.
14.5.9 north Reference
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ +
“NORTH REFERENCE” + ‘ENTER’
The North Reference for calculations can be shown as Magnetic or True (Magnetic uses an automatic
adjustment for local magnetic variation).
The North Reference used for wind computations and runway information is always Magnetic;
all other heading, bearing and Track computations are based on the user-selected reference. The
default setting is Magnetic.
14.5.10 Coordinate System
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “UNITS SETUP” + ‘ENTER’ +
“COORDINATE SYSTEM” + ‘ENTER+ ’
Sets the display of the Latitude/Longitude coordinates system among:
ddd MM SS (Degrees, Minutes, Seconds)
ddd MM.mm (Degrees, Minutes - to two decimals)
ddd MM.mmm (Degrees, Minutes - to three decimals)
UtM, oSGB
The default setting is DDD MM.mm.
14.6 xM WeAtheR
See WX XM addendum booklet downloadable from AvMap website. this function is not available
outside north America .
14.7 CLeAR USeR dAtA
Deletes all Flight Plans, Track history and User Waypoints.