Crestron electronic TPS-TPI - Manual (Page 17)

Crestron Isys™ TPS-TPI Touchpanel Interface
The Play WAV File button appears beneath Audio Menu title block. Select this
button to adjust the volume and balance as a pre-loaded WAV file plays. WAV file
audio messages can provide that custom interface, assuming this feature is enabled.
To enable this feature, verify that the WAV On button is active (red text). An active
WAV Off button disables the feature. Refer to "Appendix A: WAV File Audio
Messages" on page 25 for WAV files.
Line level audio is possible only when enabled and the proper external connections
are made. Refer to "I/O Connectors" on page 2 for information about the AUDIO
INPUT port. To enable this feature, verify that the Line On button is active (red
text). An active Line Off button disables the feature.
Confirmation of a button press on a touch-sensitive screen overlay is acknowledged
by an audible click assuming this feature is enabled. To enable this feature, verify
that the Key Click On button is active (red text). An active Key Click Off button
disables the feature.
NOTE: If key click is enabled on a display, each press of the display results in an
audible click. It may be desirable to conceal the key click sound for certain buttons
(e.g., if the button triggers playing of a WAV file). Using VT Pro-e, the panel
designer has the option to suppress the key click on a button-by-button basis from
the "Button Properties" dialog.
It is possible to enable/disable all audio types (WAV, line, and key click) with the
press of a single button. The All Audio On and All Audio Off buttons allow for
global muting. Select the All Audio On button to enable audio; select the All Audio
Off button to disable audio.
Select the Default Settings button to restore all Audio Menu buttons and settings to
a factory-adjusted preset. Select the Return button, located at the lower right corner
of the Audio Menu, after audio parameters have been set.
RGB Menu
NOTE: The RGB button is displayed on the Setup Menu only if the TPS-XVGAL
is properly installed. Selection of the RGB button opens the RGB Menu from which
the user can adjust RGB settings.
The TPS-TPI can display a computer-generated video format. The type of format
must be selected carefully or the video may appear unstable or noisy. Selecting the
RGB button, located to the right on the top row of the Setup Menu, displays the
RGB Menu, shown after this paragraph.
RGB Menu
Operations Guide - DOC. 5855 Touchpanel Interface: Crestron Isys™ TPS-TPI • 13