Crestron electronic TPS-TPI - Manual (Page 8)

Touchpanel Interface Crestron Isys™ TPS-TPI
Physical Description
The electronic hardware of the TPS-TPI, shown after this paragraph, is housed in a
black metal enclosure with a silk-screened top panel. All audio, video, Ethernet,
RS-232, and network connections are made on the top panel or one side of the unit.
Ears are attached at the shorter sides of the unit. There are three holes per ear for
inserting mounting screws. The ears can be removed (six screws) to reduce the size
of the TPS-TPI. If the ears are removed, there are rubber feet on the under side of the
unit for stabilization on a flat surface.
NOTE: Video, RGB, and Ethernet connections are available after installing the
appropriate expansion card into the TPS-TPI.
Physical Views of the TPS-TPI (Top Panel)
14.133 in
(35.898 cm)
9.450 in
(24.003 cm)
CRESTRON ELECTRONICS INC.
ROCKLEIGH, NJ 07647 USA
0.625 in
(1.588 cm)
4.100 in
(10.414 cm)
4.100 in
(10.414 cm)
Physical Views of the TPS-TPI (Sides and Bottom Panels)
12.484 in
(31.709 cm)
2.922 in
(7.422 cm)
2.797 in
(7.104 cm)
4 • Touchpanel Interface: Crestron Isys™ TPS-TPI Operations Guide - DOC. 5855