Compaq 1400 - Manual (Page 38)

3-18 U SING Y OUR N OTEBOOK P RESARIO N OTEBOOK B EYOND S ETUP G UIDE
1400 S ERIES
3. Using your arrow keys, select the Security option from the
menu bar.
4. Move to Set Supervisor Password. Press the Enter key.
5. Set your personal password, and press the Enter key. You
must confirm the password and press the Enter key again.
6. Move to Password on boot using the + or - keys to
select Enable.
7. Using the arrow keys, select Exit from the menu bar.
8. Make sure that Exit Saving Changes is selected. Press the
Enter key.
9. Select Yes to save your changes and exit.
Your power-on password is now set. Every time you turn on
your Notebook, resume working from hibernation mode, or
access F10 Setup, you must enter this password.
Caution: F10 Setup is for experienced users only. Changing
settings may affect the functionality of your Notebook.
Caution: Write your password down in a secure location. If you
forget or lose your password, a Compaq service technician must
reset your Notebook for you to be able to access your files.