Carl Goldberg GBGA1089 - Manual (Page 11)

11
INSTALLING THE LANDING GEAR
Collect the following items:
(6) 10-32 x 1” Socket Head Bolts
(4) #10 Washers
(2) Landing Gear (left & right)
(2) Lower Wing Strut Brackets
1. Determine which is the front of the landing
gear.
2. Insert the left landing gear into the slot on the
bottom of the fuselage.
Slide the lower wing strut bracket into the slot
found above the landing gear slot.
Place thread lock on one of the 10-32 x 3/4”
bolts, and insert it through the wing bracket
and the lower outer hole of the landing gear
plate.
Screw the bolt into the landing gear below..
Place thread lock on two more bolts and using
washers finish mounting the left landing gear.
Repeat for the right landing gear.
Front
Collect the following items:
(2) Axles with Nuts
(2) wheels
(4) Wheel Collars with Philip Head Set Screws
(4) 4-40 blind nuts
(4) 4-40 x 1/2 “ socket Head Bolts
WHEELS & WHEEL PANTS
1. Mount the axle onto the landing gear.
Place the wheel pant onto the axle.