Overheated engine protection operating mode, Overheated engine, Protection operating mode -22 – CHEVROLET 2012 Avalanche User Manual

Page 352: 22 vehicle care

Advertising
background image

Black plate (22,1)

Chevrolet Avalanche Owner Manual - 2012 - crc 2nd edition - 11/7/11

10-22

Vehicle Care

If No Steam Is Coming from
the Engine Compartment

The ENGINE OVERHEATED STOP
ENGINE or the ENGINE
OVERHEATED IDLE ENGINE
message, along with a low coolant
condition, can indicate a serious
problem.

If an engine overheat warning is
displayed but no steam can be seen
or heard, the problem may not be
too serious. Sometimes the engine
can get a little too hot when the
vehicle:

.

Climbs a long hill on a hot day.

.

Stops after high-speed driving.

.

Idles for long periods in traffic.

.

Tows a trailer. See Trailer
Towing on page 9‑67
.

If the overheat warning is displayed
with no sign of steam:

1. Turn the air conditioning off.

2. Turn the heater on to the highest

temperature and to the highest
fan speed. Open the windows as
necessary.

3. In heavy traffic, let the engine

idle in N (Neutral) while stopped.
If it is safe to do so, pull off the
road, shift to P (Park) or
N (Neutral) and let the
engine idle.

If the temperature overheat gauge is
no longer in the overheat zone or an
overheat warning no longer
displays, the vehicle can be driven.
Continue to drive the vehicle slowly
for about 10 minutes. Keep a safe
vehicle distance from the vehicle in
front. If the warning does not come
back on, continue to drive normally.

If the warning continues, pull over,
stop, and park the vehicle
right away.

If there is no sign of steam, idle the
engine for three minutes while
parked. If the warning is still
displayed, turn off the engine until it
cools down. Also, see “Overheated
Engine Protection Operating Mode”
later in this section.

Overheated Engine
Protection
Operating Mode

If an overheated engine condition
exists and the ENGINE POWER IS
REDUCED message is displayed,
an overheat protection mode which
alternates firing groups of cylinders
helps prevent engine damage. In
this mode, a loss in power and
engine performance will be noticed.
This operating mode allows the
vehicle to be driven to a safe place
in an emergency. Driving extended
distances and/or towing a trailer in
the overheat protection mode
should be avoided.

Advertising