CHEVROLET 2011 Silverado - Manual (Page 13)

Black plate (5,1) Silverado/Sierra Hybrid - 2011
Storage 4-5
Removing the Tonneau Cover
1. Open the cover by following the
procedure described previously,
under “Opening the Tonneau
Cover”.
2. Disengage the locking tabs,
located on the front handles, by
pulling them rearward.
3. Turn the handles inward to
release.
4. Pull the clamp down and turn the
assembly to disengage it from
the lip of the truck box.
5. Turn the cover to expose the
handles.
6. Align the clamp assembly
bolt (A), with the retention
feature (B).
7. Turn the handle assembly
sideways by tilting the assembly
bolt (A) into the slot of the
retention feature (B).
8. The handle should lie flat on the
panel with the handles facing
inward. Press firmly to secure.
9. Remove the tonneau cover from
the vehicle.