Storage, Additional storage features, Tonneau cover (hard tonneau) – CHEVROLET 2011 Silverado User Manual
Page 9: Storage -1, Additional storage features -1, Engine exhaust
Black plate (1,1)
Silverado/Sierra Hybrid - 2011
Storage
4-1
Storage
Additional Storage Features
Tonneau) . . . . . . . . . . . . . . . . . . . . 4-1
Tonneau) . . . . . . . . . . . . . . . . . . . . 4-6
Additional Storage
Features
Tonneau Cover (Hard
Tonneau)
Installing the Cover
{
CAUTION
An improperly stored cargo cover
could be thrown about the vehicle
during a collision or sudden
maneuver. Someone could be
injured. If the cover is removed,
always store it in the proper
storage location. After positioning
the cargo cover back on the
vehicle, always be sure that it is
securely reattached by properly
securing the straps and latches.
1. Position the tonneau cover onto
the top of the pickup box with
the locator tabs positioned into
the front stake pockets.
If equipped, remove the front
stake pocket covers from the
bed rail protectors. The locators
must fully seat into the stake
pocket.
2. Align the front edge of the cover
with the front edge of the bed rail
so that it is centered on each
side of the truck bed.
3. Lower the front clamp from its
storage position.