CHEVROLET 2011 Silverado - Manual (Page 19)

Black plate (11,1) Silverado/Sierra Hybrid - 2011
Storage 4-11
5. When the cover is rolled out,
place the rear rail into the rear
pivot mounts. Firmly press down
on each side of the cover, until
the latches are secured into the
side rails. If latch is too tight,
loosen the tension adjustment
screws. If the latch is not
securely holding the rear rail,
tighten the tension adjustment
screws. Only the driver's side
has a latch.
6. Secure the driver side Velcro ® of
the cover to the side rail. Then
pull the cover tight across the
bed and fasten the Velcro
® on
the passenger side.
7. Secure the buckles by folding
them once, then slide them
under the cord located on the
cover.
Secure in Open Position
1. To open the cover, open tailgate
and push down on the cover.
The pull back on pull strap.
2. From the drivers side, roll the
cover up tightly.
3. When the cover is rolled up,
buckle both tie-down straps. Pull
both straps tight.