CHEVROLET 2011 Silverado - Manual (Page 17)

Black plate (9,1) Silverado/Sierra Hybrid - 2011
Storage 4-9
9. Remove the paper from the
provided clear tape strip and
apply to the painted surface
below the pull strap.
Adjustment
If there is excessive sideways
movement of the crossrails, move
and re-install the clamps on the
loose areas using the inner groove
of the clamp.
Cover
Installation
1. Place the cover assembly into
the front pivot mounts firmly
against the adjustment screws.
2. Verify the gap between the
adjuster screws and pivot
mounts is 3/16 inch. Adjust if
needed.