Antilock brake system (abs) warning light, Stabilitrak® indicator light, Antilock brake system (abs) – CHEVROLET 2011 Silverado User Manual

Page 29: Warning light -9, Stabilitrak, Indicator light -9, Indicator light

Advertising
background image

Black plate (9,1)

Silverado/Sierra Hybrid - 2011

Instruments and Controls

5-9

Antilock Brake System
(ABS) Warning Light

For vehicles with the Antilock Brake
System (ABS), this light comes on
briefly when the engine is in
ON/RUN.

That is normal. If the light does not
come on then, have it fixed so it will
be ready to warn if there is a
problem.

If the ABS light stays on, turn the
ignition off, if the light comes on
while driving, stop as soon as it is
safely possible and turn the ignition
off. Then start the engine again to
reset the system. If the ABS light
still stays on, or comes on again
while driving, the vehicle needs
service. If the regular brake system
warning light is not on, the vehicle
still has brakes, but not antilock
brakes. If the regular brake system
warning light is also on, the vehicle
does not have antilock brakes and
there is a problem with the regular
brakes. See Brake System Warning
Light on page 5‑8
.

For vehicles with a Driver
Information Center (DIC), see Driver
Information Center (DIC) on
page 5‑11
for all brake related DIC
messages.

StabiliTrak

®

Indicator

Light

For vehicles with StabiliTrak, this
warning light comes on briefly when
the ignition is in ON/RUN.

If it does not, have the vehicle
serviced by your dealer. If the
system is working normally the
indicator light goes off.

Advertising