58 seats and restraints – CHEVROLET 2011 Aveo User Manual

Page 108

Advertising
background image

Black plate (58,1)

Chevrolet Aveo Owner Manual - 2011

3-58

Seats and Restraints

5. Pull the shoulder belt all the way

out of the retractor to set the
lock. When the retractor lock is
set, the belt can be tightened but
not pulled out of the retractor.

6. To tighten the belt, push down

on the child restraint, pull the
shoulder portion of the belt to
tighten the lap portion of the belt,
and feed the shoulder belt back
into the retractor. When installing
a forward-facing child restraint,
it may be helpful to use your
knee to push down on the child
restraint as you tighten the belt.

Try to pull the belt out of the
retractor to make sure the
retractor is locked. If the
retractor is not locked,
repeat Steps 5 and 6.

7. Before placing a child in the

child restraint, make sure it is
securely held in place. To check,
grasp the child restraint at the
safety belt path and attempt to
move it side to side and back
and forth. When the child
restraint is properly installed,
there should be no more than
2.5 cm (1 in) of movement.

If the airbag or airbags are off, the
off indicator in the passenger airbag
status indicator will come on and
stay on when the vehicle is started.

If a child restraint has been installed
and the off symbol is not lit, see “If
the On Indicator is Lit for a Child
Restraint” under Passenger Sensing
System on page 3‑31
for more
information.

To remove the child restraint,
unbuckle the vehicle's safety belt
and let it go back all the way.

Advertising