CHEVROLET 2011 Aveo User Manual

Page 116

Advertising
background image

Black plate (4,1)

Chevrolet Aveo Owner Manual - 2011

5-4

Instruments and Controls

INT (Intermittent): Move to this
position for a delayed wiping cycle.
Turn the band on the windshield
wiper toward FAST or SLOW for a
shorter or longer delay between
wipes. The wiper speed can only be
adjusted when the lever is in the
INT position.

OFF: Turns the windshield
wipers off.

Misting Function

Move the lever toward INT for a
single wiping cycle. Hold it there
until the windshield wipers start;
then let go. The windshield wipers
will stop after one wipe. If more
wipes are needed, hold the band
toward INT longer.

Clear ice and snow from the wiper
blades before using them. If frozen
to the windshield, carefully loosen or
thaw them. Damaged wiper blades
should be replaced. See Wiper
Blade Replacement on page 10‑30
.

Heavy snow or ice can overload the
wipers. A circuit breaker stops them
until the motor cools.

Windshield Washer

To use this feature, the ignition
must be turned to ON/RUN. Pull
the windshield washer/wiper lever
toward you to spray washer fluid on
the windshield.

The spray continues until the lever
is released. The wipers will run a
few times and either stop or will
resume at the speed being used
previously. See Washer Fluid on
page 10‑24
for information on filling
the windshield washer fluid.

{

WARNING

In freezing weather, do not use
the washer until the windshield
is warmed. Otherwise the
washer fluid can form ice on the
windshield, blocking your vision.

Advertising