CHEVROLET 2011 Aveo - Manual (Page 144)

Black plate (4,1) Chevrolet Aveo Owner Manual - 2011
7-4 Infotainment System
SCAN: Press to scan radio
stations. The radio goes to a station,
plays for a few seconds, then goes
to the next station. Press this button
again to stop scanning.
The radio only scans stations with a
strong signal in the selected band.
AST (Automatic Store): Twelve
preset stations with the strongest
reception in the area can be
automatically stored. The radio will
only scan stations with a strong
signal that are in the selected AM or
FM band. If the Automatic Store
function is started in the FM band,
only FM stations are stored in
preset pages A1 and A2. If the
Automatic Store function is started
in the AM band, only AM stations
are stored in A1 and A2.
A combination of AM, FM and XM (if
equipped) stations can be stored
manually into the other four favorite
pages.
To use Automatic Store:
1. Press and hold AST to use Auto
Store mode.
2. Press the pushbutton below the
ON tab on the radio display.
3. Automatic Store searches for
radio stations with a strong
signal and automatically set
presets A1 and A2 with new
stations.
4. After all stations are set, press
the pushbutton below the arrow
tab on the radio display to return
to the main radio screen
To reset the automatically stored
radio stations, press and hold AST.
Then press the pushbutton below
the RESE tab on the radio display.
If no stations are stored on preset
pages A1 and A2, the RESE option
does not appear in the radio display.
When the Automatic Store function
is used, any stations that were
previously set will be deleted and
replaced with new stations.
Finding a Station
(Radio with CD, and Radio
with Six‐Disc CD)
BAND: Press to choose FM, AM,
or XM (if equipped). The display will
show the selection.
u
SEEK: Press to seek the next
radio station with a strong signal in
the selected band.
t
SEEK: Press to seek the
previous radio station with a strong
signal in the selected band.
[ TUNE: Press to go to the next
station manually.
r TUNE: Press to go to the
previous station manually.
SCAN/AST: Press to scan radio
stations. The radio goes to a station,
plays for a few seconds, then goes
to the next station. The radio only
scans stations with a strong signal
in the selected band. Press SCAN/
AST again to stop scanning.