CHEVROLET 2011 Aveo User Manual

Page 57

Advertising
background image

Black plate (7,1)

Chevrolet Aveo Owner Manual - 2011

Seats and Restraints

3-7

5. Pull up the release knob located

on top of either of the rear
seatbacks.

6. Fold the rear seatback forward

and down.

Unfolding the Seatbacks

To return the seatback to the upright
position:

1. Hook the safety belts into the

safety belt guides.

2. Lift the seatback up and push it

to its original position.

{

WARNING

If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.

3. Push down and rearward firmly

on the top of the seatbacks until
it latches securely in the fully
upright position.

4. To reattach the center seat

safety belt to the mini buckle,
pull it from the retractor.

5. Push the latch plate at the end

of the safety belt strap into the
mini-buckle until the mechanism
clicks. Make sure the strap is not
twisted. The sliding latch plate
will face the front of the vehicle.

{

WARNING

A safety belt that is improperly
routed, not properly attached,
or twisted will not provide the
protection needed in a crash. The
person wearing the belt could be
seriously injured. After raising the
rear seatback, always check to
be sure that the safety belts are
properly routed and attached, and
are not twisted.

6. Insert the safety belt strap back

into the safety belt guide.

Advertising