Cruise control, Rear vision camera (rvc), Ultrasonic parking assist – CHEVROLET 2010 Silverado User Manual

Page 34

Advertising
background image

See DIC Vehicle Customization (With DIC Buttons) on
page 4‑73
.

Cruise Control

The cruise control buttons
are located on left side of
the steering wheel.

T

Turns the system on

or off. The indicator light
is on when cruise control
is on and turns off when
cruise control is off.

+ RES : Press to make the vehicle accelerate or
resume to a previously set speed.

SET − : Press to set the speed or make the vehicle
decelerate.

[

: Press to cancel cruise control without erasing the

set speed from memory.

See Cruise Control on page 4‑7.

Rear Vision Camera (RVC)

The rear vision camera displays a view of the area
behind the vehicle when the vehicle is shifted into
R (Reverse) on the inside rear view mirror or the
navigation screen, if equipped.

To clean the camera lens, located in the bezel for the
tailgate handle, rinse it with water and wipe it with a soft
cloth.

For more information, see Rear Vision Camera (RVC)
on page 3‑63
.

Ultrasonic Parking Assist

This feature uses sensors on the rear bumper to detect
objects while parking the vehicle. URPA comes on
automatically when the shift lever is moved into
R (Reverse) and operates at speeds less than 8 km/h
(5 mph). URPA uses audio beeps to provide distance
and system information.

Keep the sensors on the vehicle's rear bumper clean to
ensure proper operation.

The system can be disabled by pressing the rear park
aid disable button located next to the radio.

See Ultrasonic Rear Parking Assist (URPA) on
page 3‑60
for more information.

1-28

Advertising