CHEVROLET 2010 Silverado - Manual (Page 98)

2. See Securing a Child Restraint in the Right Front
Seat Position (With Passenger Sensing System)
on page 2‑61 or Securing a Child Restraint in the
Right Front Seat Position (With Airbag Off Switch)
on page 2‑65 or Securing a Child Restraint in the
Right Front Seat Position (Heavy Duty Crew Cab
Only) on page 2‑70 for instructions on installing
the child restraint using the safety belts.
3. Push and pull the child restraint in different
directions to be sure it is secure.
Crew and Extended Cab Models
1. Attach and tighten the lower attachments to the
lower anchors. If the child restraint does not have
lower attachments or the desired seating position
does not have lower anchors, secure the child
restraint with the top tether and the safety belts.
Refer to your child restraint manufacturer
instructions and the instructions in this manual.
1. 1. Find the lower anchors for the desired
seating position.
1. 2. Put the child restraint on the seat.
1. 3. Attach and tighten the lower attachments on
the child restraint to the lower anchors.
2. If the child restraint manufacturer recommends that
the top tether be attached, attach and tighten the
top tether to the top tether anchor (loop), if your
vehicle has one. Refer to the child restraint
instructions and the following steps:
Example — Rear Driver's Side Position
2-56