License plate lamp, Replacement bulbs, License plate lamp -62 replacement bulbs -62 – CHEVROLET 2010 Silverado User Manual
Page 506
4. Install a new bulb into the socket, turn it clockwise,
and press it in until it is tight.
5. Reinstall the lens and the four screws.
License Plate Lamp
To replace one of these bulbs:
1. Reach under the rear bumper for the bulb socket.
2. Turn the bulb socket counterclockwise and pull the
bulb socket out of the connector.
3. Pull the old bulb from the bulb socket, keeping the
bulb straight as you pull it out.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the bulb
socket.
Replacement Bulbs
Exterior Lamp
Bulb Number
Back-up Lamp
3047 or 921
Back-up Lamp*
1156
Cargo Lamp and Center
High-Mounted Stoplamp (CHMSL)
912
Fender Marker Lamp
W5WLL
High-Beam Headlamp
9005
Low-Beam Headlamp
H11
License Plate Lamp
168
Sidemarker Lamp/Stoplamp/Taillamp/
Turn Signal Lamp
3047
Stoplamp/Turn Signal Lamp/Taillamp*
1157
* Chassis Cab Models
For replacement bulbs not listed here, contact your
dealer/retailer.
6-62