Initial drive information, Remote keyless entry (rke) system, Remote vehicle start – CHEVROLET 2010 HHR User Manual

Page 10: Initial drive information -4

Advertising
background image

Initial Drive Information

This section provides a brief overview about some of
the important features that may or may not be on your
specific vehicle.

For more detailed information, refer to each of the
features which can be found later in this owner manual.

Remote Keyless Entry (RKE)
System

The RKE transmitter is used to remotely lock and
unlock the doors from up to 18 m (60 feet) away from
the vehicle.

Press

K

to unlock the

driver door. Press

K

again

within five seconds to
unlock all remaining doors.

Press

Q

to lock all doors.

Lock and unlock feedback can be personalized.

Press and hold

*

or

+

for approximately one

second to open the rear driver or passenger side door.

Press

L

and release to locate the vehicle.

Press

L

and hold for three seconds to sound the panic

alarm.

Press

L

again to cancel the panic alarm.

See Keys on page 3-3 and Remote Keyless Entry
(RKE) System Operation
on page 3-4.

Remote Vehicle Start

With this feature the engine can be started from outside
of the vehicle.

Starting the Vehicle

1. Aim the RKE transmitter at the vehicle.

2. Press

Q

.

3. Immediately after completing Step 2, press and

hold

/

until the turn signal lamps flash.

1-4

Advertising