Turn signal/multifunction lever, Turn and lane-change signals – CHEVROLET 2010 HHR User Manual

Page 164

Advertising
background image

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
operates the following:

G

: Turn and Lane-Change Signals

5 3

: Headlamp High/Low-Beam Changer

O

: Exterior Lamp Control

Flash-to-Pass.

Information for these features is on the pages following.

Turn and Lane-Change Signals

An arrow on the instrument
panel cluster flashes in the
direction of the turn or
lane change.

Move the lever all the way up or down to signal a turn.

Raise or lower the lever until the arrow starts to flash
to signal a lane change. Hold it there until the lane
change is complete.

The lever returns to its starting position when it is
released.

If after signaling a turn or a lane change the arrows
flash rapidly or do not come on, a signal bulb could be
burned out.

Have the bulbs replaced. If the bulb is not burned out,
check the fuse. See Fuses and Circuit Breakers on
page 6-115
.

4-4

Advertising