Replacement bulbs, Windshield wiper blade replacement, Replacement bulbs -53 – CHEVROLET 2010 HHR User Manual

Page 347: Windshield wiper blade replacement -53

Advertising
background image

5. Push and turn the license plate back through the

fascia opening.

6. Reinstall the two screws holding the license plate

lamps to the fascia.

Replacement Bulbs

Exterior Lamp

Bulb Number

Back-up Lamp and CHMSL

921

Front Turn Signal and Parking
Lamp (Amber)

5702KA

Front Turn Signal and Parking
Lamp (Clear)

B2N

Headlamp High/Low-Beam

H13

Stoplamp/Taillamp/Turn Signal

3057KX

For replacement bulbs not listed here, contact your
dealer/retailer.

Windshield Wiper Blade
Replacement

Windshield wiper blades should be inspected for wear
or cracking. See Scheduled Maintenance on page 7-3
for more information on wiper blade inspection.

Replacement blades come in different types and are
removed in different ways. For the proper type and
length, see Maintenance Replacement Parts on
page 7-12
. Here’s how to remove the wiper blade:

1. Pull the windshield wiper arm away from the

windshield.

2. While holding the wiper arm, lift the clip up from the

blade connecting point, and pull the blade assembly
down toward the windshield to remove it from the
wiper arm.

3. Install the new wiper blade on the wiper arm and

press down on the clip to snap it into place.

6-53

Advertising