CHEVROLET 2010 HHR User Manual

Page 420

Advertising
background image

Maintenance

I

Change engine oil and filter. See Engine Oil on
page 6-19
. An Emission Control Service.

Engine coolant level check. See Engine Coolant on
page 6-29
.

Windshield washer fluid level check. See Windshield
Washer Fluid
on page 6-36.

Tire inflation check. See Inflation - Tire Pressure on
page 6-62
.

Tire wear inspection. See Tire Inspection and
Rotation
on page 6-68.

Rotate tires. See Tire Inspection and Rotation on
page 6-68
.

Fluids visual leak check (or every 12 months,
whichever occurs first). A leak in any system must
be repaired and the fluid level checked.

2.2L and 2.4L Engines: Engine air cleaner filter
inspection (vehicles driven in dusty conditions
only). See Engine Air Cleaner/Filter on page 6-25.

2.0L Engine: Engine air cleaner filter inspection.
See Engine Air Cleaner/Filter on page 6-25.

Brake system inspection (or every 12 months,
whichever occurs first).

Maintenance

II

Perform all services described in Maintenance

I

.

Steering and suspension inspection. Visual
inspection for damaged, loose, or missing parts or
signs of wear.

Engine cooling system inspection. Visual inspection
of hoses, pipes, fittings, and clamps and
replacement, if needed.

Windshield wiper blade inspection for wear,
cracking, or contamination and windshield and wiper
blade cleaning, if contaminated. See Windshield
and Wiper Blades
on page 6-111. Worn or damaged
wiper blade replacement. See Windshield Wiper
Blade Replacement
on page 6-53.

Body hinges and latches, key lock cylinders,
and rear compartment hinges lubrication. See
Recommended Fluids and Lubricants on page 7-10.
More frequent lubrication may be required when
vehicle is exposed to a corrosive environment.
Applying silicone grease on weatherstrips with a
clean cloth makes them last longer, seal better, and
not stick or squeak.

Restraint system component check. See Checking
the Restraint Systems
on page 2-75.

7-4

Advertising