Crestron electronic C2N-TFM - Manual (Page 17)

Crestron C2N-TFM FM Radio Tuner
Operations Guide - DOC. 6233A FM Radio Tuner: C2N-TFM • 13
Cresnet system uses a different model touchpanel, you may wish to recompile the
project for that touchpanel.
Preparation
In preparation for running the FM Tuner example program, do the following:
1. Complete the procedures detailed in “Setup,” which begins on page 8.
2. Verify that communication setup procedures described in
“Communication Settings” on page 34 have been completed.
3. After downloading the Example Program from the Crestron website,
www.crestron.com/exampleprograms , (search for C2N-TFM.Basic
Example.zip), use the instructions given in “Upload via Crestron
Viewport” on page 36, to load the .spz program to the control system
and the .vtz program to the touchpanel.
Running the FM Tuner Example Program
Once the programs are loaded to the touchpanel and the control system, the main
screen appears on the touchpanel, as shown in the following illustration.
NOTE: The example program described below is preliminary and included to
illustrate the level of functionality available with this product. This information will
be replaced as soon as the final version of the program becomes available.
FM Tuner Example Program Main Screen
The buttons at the top of the screen select the FM Tuner’s general functions: Band
buttons – FM, AM, or WX (weather) choose the desired tuning band; the Europe