Crestron electronic C2N-TFM - Manual (Page 7)

Crestron C2N-TFM FM Radio Tuner
Operations Guide - DOC. 6233A FM Radio Tuner: C2N-TFM • 3
Specifications of the C2N-TFM (continued)
SPECIFICATION DETAILS
S/N Ratio @ 65 dBf, mono/stereo 72 dB / 67 dB
IF Rejection 100 dB
AM Rejection 55 dB
Stereo Separation 40 dB
Audio output level @ 1 kHz
RMS
1V
RMS
Output impedance <100 ohms single-ended
Recommended load impedance >1K Ohm
Ports/Connectors
AM
RADIO
RJ-45 for link (up to 500 feet) to AM/Weather band tuner
FM ANT F-Type coaxial connector for FM antenna input
NET One 4-pin mini-terminal block connector for Cresnet ®
interface (24, Y, Z, G)
Environmental temperature 41° to 122°F (5° to 50°C)
Humidity 10% to 90% RH (non-condensing)
Dimensions Height: 1.80 in (4.57 cm)
Width:
7.07 in (17.96 cm)
Depth: 6.88 in (17.48 cm)
Weight 1.86 lb (0.837 kg)
1 The latest versions can be obtained from the Downloads | Software Updates section of the Crestron
website (
www.crestron.com) . Refer to NOTE below.
2 Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
3 Filenames for CNX and ST-CP update files have a UPZ extension. Files on the website may be .zip
or self-extracting .exe files containing the .cuz or .upz file. All can be obtained from the Downloads
section of the Crestron website. To avoid program problems, make sure you are using the update file
with the correct suffix letter (e.g., S, V, W, X)
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Physical Description
The C2N-TFM is housed in a black enclosure with labeling on the front and rear
panels. The front of the unit includes ten LEDs that indicate the unit’s status, and all
local controls. All connections, except for headphones, are made on the back of the
unit. Four rubber feet on the bottom of the unit provide stability and prevent
slippage
. Refer to the figures below and on the following page.
C2N-TFM Physical Views