Crestron electronic C2N-TFM - Manual (Page 22)

FM Radio Tuner Crestron C2N-TFM
18 • FM Radio Tuner: C2N-TFM Operations Guide - DOC. 6233A
C2Net Device, Slot 9
Setting the Net ID in Device Settings
Double-click the C2N-TFM icon to open the “Device Settings” window. This
window displays the C2N-TFM device information. If necessary, select the Net ID
tab to change the C2N-TFM Net ID, as shown in the following figure.
C2N-TFM “Device Settings” Window
NOTE: SIMPL Windows automatically changes Net ID values of a device added to
a program if a duplicate device or a device with the same default Net ID already
exists in the program. Always ensure that the hardware and software settings of the
Net ID match. For Net ID hardware setting details, refer to “Identity Code” on page
9.
C2N-TFM Symbol in Programming Manager
Programming Manager is where programmers “program” a Crestron control system
by assigning signals to symbols. Due to the extensive functionality of the unit, a
single C2N-TFM symbol in SIMPL Windows would be too complex. Instead, the
C2N-TFM functions are divided into three sub-slots: Slot 01 – FM Tuner Controls;
Slot 02 – FM Tuner RDS Information; and Slot 03 – AM Tuner Controls. In
Program Manager, expand the C2N-TFM to view the individual sub-slots; then drag
the desired symbols to Detail View. The C2N-TFM sub-slots and corresponding
symbols are described in the following paragraphs. Because the FM tuner controls
and the AM tuner controls symbols are also complex, each is illustrated and
described in two parts: digital inputs and outputs and analog inputs and outputs.
Tables defining the input and output signals follow each section.