Cal Flame G3000 - Manual (Page 21)

Barbecue Owner’s Manual
www.calspas.com
New Access Doors
1. Provide a cut out and a door jamb with inside dimensions as follows:
16 1/4" X 19 “ for a single door
28 1/4” x 19 3/8” for double doors
2. Secure the steel frame with 16 #10 x 1” truss head phillips screws.
3. Attach doors to frame.
4. Adjust doors as follows:
a. For height adjustment, loosen the two screws attached to each mounting plate.
b. Snap off hinge and secure mounting plate with #6 X 1” flat phillips screws.
c. For side adjustment, turn the screws to increase or decrease door overlay.
d. For depth adjustment, loosen screws, adjust the door to the desired position and retighten the
screws.
Figure 21. Side burner installation
Page 17
Assembly and Installation
12/17/04