Purl-edge buttonhole, Adjusting stitch density – Kenmore 17922 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PURL-EDGE BUTTONHOLE
to add a professional touch to your sewing
ou will want to make purledged button-
oles. These are obtained by sewing a wide
uttonhole over a narrow stitched button-
ole.
hoose the correct size for your button,
risert the template into the guide plate
lurning to the narrower of the sizes. Use the
iiame settings as for regular buttonhole and
just stitch width control to 1.
Drop the guide plate over the pinion gear and
sew around the buttonhole once. (STEP 1)
0
sew wider outer buttonhole, lift the guide
ate from the pinion gear and turn the
Wmplate to wider size. Adjust stitch width
etting to 1.5. and sew around buttonhole
ijjain. (STEP 2)
43
I
It
ADJUSTING STITCH DENSITY
Depending upon the fabrics on which you are
|i!Wing, or your own preference in button-
oles, you may alter buttonhole stitch density
turning stitch density control knob.
For more density, turn the knob toward
you.
For less density, turn the knob away from
you.