Kenmore 3405594 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• The installation spacing (shown below)
is in inches and is the minimum allowable.
• Additional spacing should be considered
for ease of installation and servicing.
• If closet door is installed, the minimum
air openings in top and bottom are
required. Louvered doors with equivalent
air openings in top and bottom are
acceptable.
MINIMUM INSTALLATION SPACING
' Recessed area and closet installations
require a 6-inch minimum clearance
above the laundry center.
' All installations must be exhausted
outside. Use at least the minimum
dimensions indicated.
FRONT VIEW
(DOOR NOT SHOWN)
* Additional clearances for wall, door and Hoar tnaldinp m ay be required.
'*
* ***
Opening is m iniinum for close! door. Louvered door with equivalent air openings
is acceptable.
*** Additional space Is needed when exiernal exhausi elbow Is used. Can be 0" clearance
when bouse exhausting is lined up directly wilh dryer exhaust.
18