Mobile home requirements – Kenmore 3405594 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MOBILE HOME REQUIREMENTS

The laundry center must not be installed
where It can be exposed to water and/or
weather.

• Proper operation of washer cycles

requires temperatures above 32°F
(at lower temperatures, some water
may remain in washer). See page 53

for Winterizing Information.

• Proper operation of dryer cycles

requires temperatures above 45°F (at
lower temperatures, the dryer may not

shut off at the end of automatic cycles
and drying times will be extended).

• Use at least the minimum installation

spacings described on page 18. This
will ensure you have an adequate
clearance for service and proper
operation including flow of combustion
and ventilation air, and that you have
a sufficient distance from combustible
construction.

• Special provisions must be made

for the introduction of outside air into

the laundry center when installed in a

mobile home. The area of any opening

for the introduction of outside air (such

as a nearby window) should be at least
twice as large as the laundry center
exhaust opening.

This laundry center is suitable for mobile

home installations. The installation must

conform to the Manufactured Home

Construction and Safety Standard, Title 24
CFR, Part 3280 (formerly the Federal

Standard for Mobile Homes Construction
and Safety, Title 24, HUD Part 280).

• Laundry center exhaust vent must

not be connected with screws or other

devices which extend into the interior
of the vent.

• Agas laundry center must be exhausted

outdoors. The exhaust vent must be
securely fastened to a non com bust! ble

portion of the mobile home structure

and must not terminate beneath the

mobile home.

For mobile home use, gas laundry centers

must be securely fastened to the floor.
Order Mobile Home Installation Kit
346764 from your Sears store or Sears
Service Center. Kit includes the neces­
sary fastening hardware and detailed

installation instructions. Exhaust system
hardware is also available through your

Sears store or Sears Service Center.

19

Advertising