Setting your cycle selector control (timer) – Kenmore 3405594 User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SETTING YOUR CYCLE
SELECTOR CONTROL (TIMER)

Use this control to choose the agitation

time and to start the washer. Each cycle

is designed with the wash and spin speeds

that are appropriate for the fabrics and

soil levels in your wash load.

• For heavy soil and sturdy fabrics,

use the full time (SUPER or REGULAR
if indicated).

• For light soil and delicate fabrics,

use less time (SHORT if indicated).

NOTE: Do not wash garments labeled
Hand Wash in your washer. Garments

that are labeled Hand Wash have:

• A fiber or construction that is

sensitive to agitation.

• Sensitive dyes that may bleed.

Follow care label directions for drying.
Items that may shrink should be dried

flat. Block these items by gently stretch­

ing to original measurements. Woolens

tend to shrink more the first time they

are washed.

* •

HEAVY DUTY
Use this cycle to get up to 12 minutes

of wash time for sturdy or heavily soiled

loads.

• Wash combines fast speed agitation

and fast spin speeds.

PERMANENT PRESS

The PERMANENT PRESS Cycle

includes a load cooling process

that reduces wrinkling compared
to other cycles.

You can select up to 10 minutes of
wash time. Wash combines slow speed
agitation and slow spin speeds to reduce
wrinkling.

NOTE: When the timer reaches PAUSE,

the washer will drain and pause for no

more than two minutes while some of

the wash water is drained and replaced
with cool water.

KNIT/DELICATE
Use this cycle for lingerie and loosely
knit items. Cycie has up to 8 minutes of

wash time with a pause and soak part way
through for more gentle care of lightly
soiled delicate items. Wash combines
slow speed agitation for gentle soil removal
and slow spin speeds to reduce wrinkling.

SOAK

SOAK Cycle features 4 minutes of fast
speed agitation followed by an unlimited
soak time to help remove heavy soils
and stains that need pretreatment. You
will need to reset the washer to a SPIN
setting to remove water. SOAK Cycle
should be followed by a HEAVY DUTY,

PERMANENT PRESS or PREWASH
Cycle with additional detergent.

NOTE: We do not recommend hot water

for soaking. It may set some stains.

PREWASH
Use this cycle to get up to 4 minutes

of agitation to help remove heavy soils
and stains that need pretreatment.

PREWASH Cycle should be followed
by a HEAVY DUTY or PERMANENT
PRESS Cycle with additional detergent.

36

Advertising