Kenmore 116.22822 - Manual (Page 11)

A
CAUTION
DO NOT attach or remove handle or
wands while cleaner is ON. This
could cause sparking and damage
the electrical contacts.
ATTACHMENTS ON HANDLE
Handle
Look
Button
Tetescoping
Wand
NOTE: If the
Power-Mate* is
attached, turn
cleaner off
before removing
handle from
wands.
1. Press lock
button, Ölen pull
to remove han­
dle from wand.
If your model
has the optional
feature of a handle release, press it in simi­
larly.
2. Slide attachments firm­
ly on handle as needed.
See chart below.
ATTACHMENTS ON WANDS
I.To remove
wands from
Power-Mate®,
lock wands in
straight-up
position.
Wand
Quick
Release
Pedal
2. Press wand
guide release pedal
with foot and pull
the wands straight
up out of Power­
Mate*.
The Power-Mate* plug
and cord do not have
to be removed to use
attachments on the
wands.
3. Put attachments on
wands as needed. See
ATTACHMENT USE.
ATTACHMENT USE CHART
CLEANING AREA
ATTACHMENT
FumKura*
Between
Cushions* Drapes* Stairs
Bare
Floors
Carpeted
Floors/Rugs Walls
Combination Brush ^
(Some Models)
X X X
X
Crevice Tool
(Some Models)
X X
Floor Brush H
(Some Models) oQ
X X
X
Power-Mate* ¿-eft»
(Some Mc^els)
X** X
Handi-MateJr.*
(Some Models)*" ^
X X
Power-Mate Jr.*
(Some Models)***
X X
•Always dean attachments before using on fabrics. *' Use BARE FLOOR/HIGH setting.
*•* Handi-Mate Jr.*^and Power-Mate Jr.* attachment insb^ctions are induded with the products.
wands apart. If NOTE; When separating wands, depress lock button completely before pulling v
jrand lock button is difficult to depress, push the two wands more tightly together to line up
the lock button with the hole. Depress lock button and then puli wanes apart.
11